151X1224GAP0001 VME Rack Fan DC Axial.
The VME Rack Fan DC Axial, 151X1224GAP0001 mounts on the top of the VME rack. The EBM#4294 is superseded by 151X1224GAP0001 Fan
Two supply input voltage for 151X1224GAP0001 is 24vDC. This fan is powered from the VME rack and the power is sourced from the RKPS power supply.
Operation of 151X1224GAP0001
The VME Rack Fan DC Axial, 151X1224GAP0001 is a very critical fan as its keeping the UCXX card from the thermal rundown. If there is any noise difference or speed variation found on this fan, immediately replace it. Ignoring these changes on The 151X1224GAP0001 Fan can damage the UCxx card
Overview of 151X1224GAP0001 Fan
- Very rigid compression curve for high airflow at high backpressure.
- Low operating noise level at high backpressure.
- Available as standard with PWM control input and speed signal, additional inputs, and outputs on request. 3-phase fan drive with a high degree of running smoothness.
Air Flow 106 CFM (3002 L/Min.) Approximate Size 4.7 x 4.7 In. (120 x 120 mm) Approximate Thickness 1.5 In. (38 mm) Bearing Type Ball Configuration Square Dimensions 4.7 x 4.7 x 1.5 In. (120 x 120 x 38 mm) Fan Type DC Material Metal Maximum Operating Temperature 75 C Noise Level 49 dBA Power Rating 4.5 W Rotation CW Series 4100 N Series Size 4.7 x 1.5 (120 x 38) In. (mm) Speed 3200 RPM Termination Terminals Type Square Voltage Rating 24 VDC Weight 0.86 Lbs.
General Characteristics of 151X1224GAP0001:
- Material: Aluminum housing, fiberglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx).
- Protected against reverse polarity and locking.
- Connection via single strands AWG 20, sensor and control leads AWG 22, UL1007, TR 64. Bared and tin-plated.
- Air intake over struts. The direction of rotation is clockwise, seen on the rotor.
- Mass: 425 g.